FMCC EUROPE
Components and technical solutions for power electronics

  EBG offers the SSP series to meetthe requirements of power ratings up to40 Watts while at the same time offeringvoltage ratings up to 6,000 Volts.
  These Power Film Resistors cover awide resistance range and operation upto 275°C in axial lead construction.
  A summary of the features of the SSPseries are:
  •Non-inductive Performance (EBG‘spatented process)
   •Full power and voltage ratings(derating not required)
    •Very high resistance values (see table)up to 30MΩ
    To accomplish this objective of highstability, high value, high voltage andhigh power in the SSP series, EBGemploys a special variation of itsMETOXFILM formulations. These filmsare annealed on special ceramic bodiesat temperatures above 1400°F / 800°Cand become an inherent part of thesurface of the ceramic, resulting in theirunusual performance characteristics. Asa result of EBG‘s unique non-inductivepatented process, these resistors areideally suited for high frequencyapplications, and result in less “ringing“with minimum distortion of the signalsand faster settling times.

 Specifications:
 •Resistance Tolerance:Standard: ±1% to ±10%**
 •Temperature Coefficient:for 10Ω and above 50ppm/°C.  TCreferenced to 25°C, ∆R taken at -15°C and +105°C.
 •Dielectric Strength:1,000 V DC
 •Insulation Resistance:10GΩ, min.
 •Overload/Overvoltage:5 times rated power with appliedvoltage not to exceed 1.5 timesmaximum continuous operatingvoltage for 5 seconds. ∆R 0.5%max. or 0.5Ω max., whichever isgreater. (not valid for SSP 148!)
 •Load Life:1,000 hours at rated power, ∆R0.5% max. or 0.5Ω max., whicheveris greater.
 •Thermal Shock:MIL–Std–202, Method 107, Cond.C,∆R 0.5% max. or 0.5Ω max.,whichever is greater.
 •Max. Operating Temp.: +275°C
 •Encapsulation: Silicone Confomal
 •Lead Material:O.F.H.C. Copper, tin plated

 Model
No

 Max.
Voltage

  Resistance
Min      Max
  Ω          Ω